|
| |
TEST STATION ACCESSORIES
Tinker & Rasor Shunts are available in
three sizes:
 | Orange, 0.001 Ohm, 25 Amp capacity
|
| Yellow, 0.01 Ohm, 8 Amp Capacity
|
| Red, 0.1 Ohm, 2 Amp capacity
|
|
|
T-1 and T-3 Adapters allow retrofitting of
Tinker & Rasor test stations on existing riser pipe of varying sizes. Choose
from these sizes:
| T-3 Adapter, 3.5" to 2.6" |
| T-3 Adapter, 3.5" to 1.6" |
| T-1 Adapter, 1.6" to 1" |
|
|
The Tinker & Rasor Shock Guard fits the
Model T-3 "Top Hat" test station. The Shock Guard fits on one side of the
test station terminal, keeping field personnel and others away from wire
connections. The Tinker & Rasor Shock Guard minimizes the risk of
electrocution, and meets NACE Standard RP-01-77/4.4.4 when used with
non-metallic Tinker & Rasor Banana Plugs.
|
|
The Tinker & Rasor Model T-3 Test Station
comes with standard rapid wire connection Binding Posts, as seen at right,
below. There are other kinds of terminal connectors available, including
Banana Plugs, as seen at right, above, with an exploded view of the Shock
Guard. Terminal Connectors available include:
| Standard Binding Posts |
| Non-metallic Banana Plugs |
| 18-8 Stainless Steel 1/4 x 20
|
| Non-metallic 5-way Binding posts
|
| and many more... |
|
|
| "Anti-Spin" Gaskets are available for all
Tinker & Rasor Test Station models. The "Anti-Spin" gasket does just that,
it keeps the terminal from spinning on the riser pipe. This prevents the
test station from spinning or sliding off the riser and allows superior
tightening of the terminal nut.
|
|
The Model T-3 can come in many standard and
custom configurations. For example, nickel-plated brass Bonding Straps are
available. For more information on Model T-3 Terminal configurations, see
our terminal page.
|
|
| The T-3 Flange Adapter allows for easy
placement of T-3 Test Stations to pipe flanges, walls, wooden posts, and
other areas where the installation of riser pipe is inconvenient.
|
|
| |
|
