|
| |
|
 |
|
SMALL HIGH SILICON CAST IRON ANODES |
|
Product Description |
Composition: ASTM A 518 Grade 3 |
| Silicon |
14.20 - 14.75% |
Manganese |
1.50% max. |
| Chromium |
3.25 - 5.00% |
Copper |
0.50% max. |
| Carbon |
0.70 - 1.10% |
Molybdenum |
0.20% max. |
Cable
Connection Provisions
Anotec manufactures anodes to accomodate custormers' connection
requirements, including both established industry standard methods and
special custom designs whenever warranted by demand. Typical features
are: |
|
 Type A:
Cast groove in hollow anode interior accepts customers' snap ring
connector or caulked lead. |
|
 Type S:
Cast cavity in anode end accepts caulked lead connection. |
|
 Type T:
Cast conical seat in tubular anode accepts Anotec conical lead anchor
soldered to cable. |
|
| Special features
may be developed to suit requirements on application to the factory. |
|
"Chill Cast" in Metal Molds
Anotec's proprietary process assures consistent weight, greater density,
less flake graphite grain boundary, and lower chemical segregation than Sand
Cast Anodes. The ANOTEC Chill Cast structure is imilar to "Spin Cast"
Tubular Anodes.
|
Grain Structure
Makes a Difference |
| |
|
 A
typical cross section of a sand cast anode:
Skin of non-porous equiaxial grains. Remaining section relatively porous
from interdendritic shrinkage and porosity. Predominantly flake graphite
with larger boundary areas than equivalent spheroidical graphite. |
 A
typical ANOTEC anode cross section:
A dense skin of minute columnar grains and a dense core of equiaxial
grains. Occasionally, very fine interdendritic porosity at center.
Predominantly spheroidal shaped graphite. Similar to the structure of
vacuum refined High Silicon Iron. |
|
Performance
Accelerated corrosion tests confirm that Anotec Chill Cast Anodes perform
significantly better (up to 19%) than sand cast anodes in chloride and
sulphate environments.
Test reports available on request.
MANUFACTURED IN NORTH AMERICA |
|
TYPE |
SHAPE |
CONNECTION FEATURES |
NOMINAL DIMENSIONS
inch (mm) |
NOMINAL AREA
Sq ft. (SqM) |
NOMINAL WEIGHT
lbs. (Kg.) |
| Diameter |
Length |
| 1F9-A |
Hollow Tube |
Type A, groove for snap ring or caulked lead |
1.1 (28) |
9 (230) |
.22 (.02) |
1.1 (.5) |
| 1F9-S |
Solid Rod |
Type S, caulked lead |
1.1 (28) |
9.7 (250) |
.25 (.023) |
2.5 (1.2) |
| 15K9-S |
Solid Rod |
Type S, caulked lead |
1.5 (38) |
9 (230) |
.29 (.027) |
3.0 (1.4) |
| 15K12-S |
1.5 (38) |
12 (300) |
.39 (.036) |
5.2 (2.4) |
| 15K18-S |
1.5 (38) |
18 (450) |
.59 (.055) |
7.9 (3.6) |
| 15K24-S |
1.5 (38) |
24 (600) |
.79 (.073) |
11 (5.0) |
2009
2G9 |
Hollow Tube Duct Anode |
Caulked lead or press fit bronze insert |
2 (51) |
9 (230) |
.39 (.036) |
4.6 (2.1) |
| 2212 |
Hollow Tube |
Conical seat, lead anchor, swaged for
single or string connection |
2.2 (56) |
12 (300) |
.6 (.056) |
6.2 (2.8) |
| 2224 |
2.2 (56) |
24 (600) |
1.1 (.102) |
14.8 (6.7) |
| 2242 |
2.2 (56) |
42 (1060) |
2.0 (.185) |
25 (11.4) |
| 2248 |
2.2 (56) |
48 (1220) |
2.3 (.213) |
29 (13.1) |
| 2624 |
Hollow Tube |
Conical seat, lead anchor, swaged for
single or string connection |
2.6 (66) |
24 (600) |
1.3 (.120) |
20 (9.1) |
| 2642 |
2.6 (66) |
42 (1060) |
2.4 (.222) |
36 (16.3) |
| 2648 |
2.6 (66) |
48 (1220) |
2.7 (.250) |
41 (18.6) |
| 6B3-A |
Hemispherical "Button" with Bolt Hole |
Type S, on base caulked lead. |
6
(150) |
3
(76) |
.33
(.030) |
18
(8.2) |
| 6B3-B |
Type S, on side caulked lead. |
| 3B6 |
Condenser "Bullet" Anode |
Threaded Steel Stud |
3 (76) |
6 (150) |
.5 (.046) |
12 (5.5) |
| 12B15 |
Brick Deck "Pancake" Anode |
Type S, caulked lead |
12 (300) |
1.5 (38) |
1.1 (.102) |
40 (18.1) |
A: Large 84" crate dimensions, nominal: 32"W x 87"L x 22"H inches
= 35.4Ft3
(81W x 221L x 56cm = 1.0 cbm) |
B: Small 60" crate dimensions, nominal:
32W x 62L x 22H inches · 25.2 Ft3
(81W x 157L x 56 cm = 0.71M3) |
|
| |
|
